-
1 day: €2 | 5 days: €9 |
2 days: €4 | 6 days: €10 |
3 days: €6 | 7 days: €11 |
4 days: €8 | each extra day: + €2 |
This stand may be called a baby, but don't let its name fool you! This stand will reach an impressive height of just over 12.5' (3.85 m). Besides it's impressive height it also has a load capacity of 19.8 lbs (9 Kg). In addition to all the quality details that makes Kupo stand out from other brands, this stand has the mounting stud welded directly to the top riser increasing it's strength and durability, not to mention a nice clean look.
1 day: €2 | 5 days: €9 |
2 days: €4 | 6 days: €10 |
3 days: €6 | 7 days: €11 |
4 days: €8 | each extra day: + €2 |
The Master Combo Alu Senior has all the features you'd expect in a combo stand but in a lighter weight aluminum package. This stand comes equipped with the triple function universal combo head to be compatible with any light fixture. This stand also features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. When it comes to function, being a featherweight yet strong, the Master Combo Alu Senior is a great choice.
1 day: €3 | 5 days: €14 |
2 days: €6 | 6 days: €16 |
3 days: €9 | 7 days: €18 |
4 days: €12 | each extra day: + €2 |
Chrome plated steel stand. 3 sections, 2 risers. 1 levelling leg.
1 day: €3 | 5 days: €14 |
2 days: €6 | 6 days: €16 |
3 days: €9 | 7 days: €18 |
4 days: €12 | each extra day: + €2 |
The Kupo Master C-Stand with Sliding leg has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs
1 day: €2 | 5 days: €9 |
2 days: €4 | 6 days: €10 |
3 days: €6 | 7 days: €11 |
4 days: €8 | each extra day: + €2 |
The Kupo Master C-Stand with Sliding leg has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs
1 day: €2 | 5 days: €9 |
2 days: €4 | 6 days: €10 |
3 days: €6 | 7 days: €11 |
4 days: €8 | each extra day: + €2 |
The Kupo Master C-Stand with Sliding leg has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs
1 day: €2 | 5 days: €9 |
2 days: €4 | 6 days: €10 |
3 days: €6 | 7 days: €11 |
4 days: €8 | each extra day: + €2 |
This is a replacement base for the Master C Stands with Turtle base. It features a zinc alloy base casting on that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance and the patented spring ring locking system enables you to open and close the base in under a second! It's an economical way to incorporate Kupo's game changing base design with your existing C Stand riser sections.
1 day: €2 | 5 days: €8 |
2 days: €4 | 6 days: €9 |
3 days: €6 | 7 days: €10 |
4 days: €7 | each extra day: + €2 |
The 2-1/2" grip Head consists of a pair of rotating aluminum discs attached to a baby 5/8" (16 mm) receiver. The discs have four different sized "V"-shaped jaws for varying diameters, machined with "teeth" that grab whatever is mounted between the plates securely. The 2-1/2" grip Head features an oversized ergonomic "T" handle and dedicated needle bearings for maximum torque. This grip head incorporates a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. Constructed around a solid steel central bolt with a fixed solid pin to secure it to the aluminum casting for increased strength and durability. The 2-1/2"g rip Head is most often used in conjunction with a grip arm, giving you complete flexibility to position gobos "go betweens" such as flags, scrims and silks as well as other accessories virtually anywhere.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €8 |
The 2-1/2" grip Head consists of a pair of rotating aluminum discs attached to a baby 5/8" (16 mm) receiver. The discs have four different sized "V"-shaped jaws for varying diameters, machined with "teeth" that grab whatever is mounted between the plates securely. The 2-1/2" grip Head features an oversized ergonomic "T" handle and dedicated needle bearings for maximum torque. This grip head incorporates a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. Constructed around a solid steel central bolt with a fixed solid pin to secure it to the aluminum casting for increased strength and durability. The 2-1/2"g rip Head is most often used in conjunction with a grip arm, giving you complete flexibility to position gobos "go betweens" such as flags, scrims and silks as well as other accessories virtually anywhere.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €8 |
Normally used in combination with a Grip head (art. D200) it provides an extended grip point for scrims and flags or small lights.
1 day: €2 | 5 days: €8 |
2 days: €4 | 6 days: €9 |
3 days: €6 | 7 days: €10 |
4 days: €7 | each extra day: + €2 |
Foamcore is lightweight, very strong material made with a dense polystyrene center and covered with a thick paper on both sides. It is used as a sturdy reflector for the photo and cine industries. Even a large piece weighs little and light reflected from the surface is soft and even. The Foamcore Fork stabs into the foamcenter and then the stud is placed in a grip arm or any other 5/8" baby receiver to be positioned anywhere as a reflector to bounce light or flag to block it.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €8 |
A sand bag is a what's known as a "Silent Grip" because it does its job efficiently without any complaints! Sand bags are necessary safety items. They prevent light stands from tipping over. They provide a down and dirty place to support a camera and also act as counterweights for booms. If you have people, especially children in your studio, a sand bag can prevent them from knocking down an expensive lighting fixture or worse causing injury to themselves or others.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €1 |
A sand bag is a what's known as a "Silent Grip" because it does its job efficiently without any complaints! Sand bags are necessary safety items. They prevent light stands from tipping over. They provide a down and dirty place to support a camera and also act as counterweights for booms. If you have people, especially children in your studio, a sand bag can prevent them from knocking down an expensive lighting fixture or worse causing injury to themselves or others.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €1 |
A sand bag is a what's known as a "Silent Grip" because it does its job efficiently without any complaints! Sand bags are necessary safety items. They prevent light stands from tipping over. They provide a down and dirty place to support a camera and also act as counterweights for booms. If you have people, especially children in your studio, a sand bag can prevent them from knocking down an expensive lighting fixture or worse causing injury to themselves or others.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €1 |
A sand bag is a what's known as a "Silent Grip" because it does its job efficiently without any complaints! Sand bags are necessary safety items. They prevent light stands from tipping over. They provide a down and dirty place to support a camera and also act as counterweights for booms. If you have people, especially children in your studio, a sand bag can prevent them from knocking down an expensive lighting fixture or worse causing injury to themselves or others.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €1 |
Portabrace Sand Bags are carefully designed and crafted using the same production process and materials as our famous camera cases. The Sand Bags are constructed using heavy-duty, 1000-denier Cordura® fabric and durable nylon webbing. Double-stitched seams provide extra strength and lasting value. The interior sand pouches are made of a unique, semi-flexible material that prevents tears and sand leakage. There's a built-in nylon carrying handle as well as a large, solid-steel hook and ring that allows you to wrap the Sand Bag securely around c- stand legs, tripod legs, clip it to equipment cases, or strap it to light stands.
1 day: €1 | 5 days: €5 |
2 days: €2 | 6 days: €6 |
3 days: €3 | 7 days: €7 |
4 days: €4 | each extra day: + €1 |
In need of a camera or lense? Want to light your project professionally with litepanels or kinoflos? Intend to give your scene some more meaning by making a dolly or crane shot? No problem! Make your reservation for top-notch filming equipment now!
For our frequently asked questions please check this page
Kijk voor onze veelgestelde vragen op deze pagina